Copy 46 Chip and Read/write 46 chip with CBAY Handy Baby Key Programmer

Here is detailed step for Copy 46 Chip and Read / write 46 chip with CBAY Handy Baby Key Programmer.

Instruction of 46 Chip Copy
Instruction of 46 Chip Copy-1
Step 1:Turn on the machine and go to main menu , use “up” and “down” button to select language of English.
Instruction of 46 Chip Copy-2
Step 2:Read chip data of Original key as above picture shows.

Step 3:Press “OK” button to enter into Crack procedure
Instruction of 46 Chip Copy-3
Step 4:Insert the Original key into ignition, meanwhile keep the signal coil of the clone machine near to the ignition coil, turn on the ignition lock to collect the data(If you use the smart card, put the signal coil of the clone machine near the ignition before insert the key)
Instruction of 46 Chip Copy-4
Step 5:If it shown “Collect ok, crack now?” on screen, you have successfully got the data from the car, just press “OK”

Step 6:Put the OEM key into signal coil to decode.
Instruction of 46 Chip Copy-5
Step 7:If it shows “Crack ok” as above picture shows, then decoding OK, the key security code have been calculated.

Step 8:Put clone chip into signal coil area, press “OK” to copy.

Step 9:It shows “Copy OK” as above picture shows. If you want to copy more keys, just replace new chip and press ok as step 8. If finished copy, press left button to quit.

Read and write 46 chip with CBAY Handy Baby Key Programmer
1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank.
2. Select chip mode: move mouse cursor to “Mode”, I.E “Plaintext mode”, press “OK”, the fonts turn black from white to indicate the selection mode, press “Up” and “Down” to select the Plaintext mode or password mode.
3. Enter password: move cursor to the password box under the mode, press “OK” to proceed, press “Up” and “Down” to select the data (0`F), press “Left” and “Right” to transfer password.
4. After finish press “OK”to exit, then move cursor to “Read all” to read out data.
5. Read all: read out all data for 46 chip and display the status of locked or unlocked.
6. Write: write the corresponding data; make sure 46 unlocked before writing data.
7. Enter data: the way to enter data is as the same as to enter password.

http://www.obd2express.co.uk/wholesale/cbay-hand-held-car-key-copy-auto-key-programmer-4d-46-48-chips.html

FacebookTwitterGoogle+LinkedInStumbleUponIf you like this,please share it with your friends