Fgtech galletto 4 v54 OK to read & write bmw edc17?
Is it ok to buy Fgtech galletto 4 v54 to read and write BMW ECUs? To work with edc17 without issues? Here goes to questions and answers.
Galletto brick 730d ecu and fail with too many BMW
i do at least 3 BMW a week and kess clone much better will help you choosing the right protocol will do the gob safer. The recovery mode helped many times after i started with galletto and writing fail half way throw…
By bmw, you must have good extra 12v power for reading and writing. But there are 3 different kinds of pcb i have seen of Fgtech Galletto 4 v54 from Chinese. if you have luck that you receive the good one, i think it’s worth to have it. Maybe it’s good to have the kess v2 also, because non of China tool will cover all cars good, that you will see than in practice. if you buy kess, i don’t think you will be able to do some newer bmw edc17, maybe k-tag or other tools!
My advice is, if you buy clone tools, buy all (galletto+kess+ktag) from them, that you will cover more cars, or better to buy a good original tool if you will do the work as a pro, all depends want you will do.
Fgtech Galletto 4 clone Review
i have buy the fgtech v54 and for now i must say, i am not disappointed with it.
pcb from the fgtech v54 here
the quality, it is soldered better than the v52 !
Galletto 4 v54 work’s as well as galletto 3 but much easier to install software.
It works quite stable but has one series fault. It has not TPROT10 protection disarm.
EDC17 I read in boot mode with galletto… Do job perfectly.
When you have problem, just try this way: uninstall all fgtech software. Install basic version. Connect tool and give drivers. Unplug tool. Remove basic. Install Win7 version. Plug tool + drivers. Done.
So far, i have tried
BMW E39 530D 1999 edc15 – R/W OK BY OBD
VW TOURAN 2.0TDI BKD EDC16 2007- R/W OK BY OBD
AUDI A4 2.0TDI 143HP EDC17CP14 2009-READ OK BY OBD Write not try yet
GOLF 6 2.0TDI 110HP EDC17CP14 2009-READ OK BY OBD write not try yet
opel meriva 1400 16v ,Z14XEP 66KW PETROL 2005 BOSCH ME7.6.2 Not read BY OBD
ALFA 159JTDM 16V EDC16C39 2006 READ OK by OBD 40 min Write not try yet
all without some problem in read or write