How to program DAF keys using Flyobd FVDI2 commander

 

Here, you will learn how to use Flyobd FVDI2 commander to program keys for DAF trucks. Enjoy!

 

Note:

Before programming keys, all present keys are reset and can be programmed on the same immobilizer only.

 

Start FVDI2 software

Select “Key learning”

fvdi2-program-daf-keys-1

Press “Next” to go on

fvdi2-program-daf-keys-2

Put the key to be programmed into the contact and switch it to position contact-ON

Insert Key 1 and press “Next”

fvdi2-program-daf-keys-3

The key is programmed successfully!

Amount of keys programmed: 1

To learn the next key, press “Next”

To fish key learning, press “Exit”

fvdi2-program-daf-keys-4

 

FacebookTwitterGoogle+LinkedInStumbleUponIf you like this,please share it with your friends